Best Way To Remove Corrosion… #boating #boatlife #boatowner

I have corrosion on the skeg

What is the best way to address this before painting? So if you're just painting your skeg

and you have a little bit of corrosion, sanding it down and then getting something like goof off

a red lime, muriatic acid, something that is going to eat corrosion off of there

and get you down to the bare metal to where you don't have any more corrosion on there

Depending on how bad it is, most of those chemicals are going to get all of that off

And if there is an issue, red lime, you could just take a bucket of red lime

and stick it up in there in the solution and let it sit over four hours, whatever it may be

for a period of time. It'll eat all that corrosion off after you've sanded it. You know what I'm saying

Like sand it, give it an acetone bath to clean everything off, contact cleaner, whatever

Then you'll be able to paint it. And I would paint it with zinc chromate and then do your primer, do your paint, do your clear coat