0:02
Four soft, how do you can just I'll cut it down In the water stream
0:30
Yeah. Well, here it is. This isn't, it doesn't look too bad, but it's gonna need quite a bit of work
0:43
Floor is definitely soft, so we're gonna have to cut the floor out of it, but that's not that big of a deal
0:50
We're gonna do quite a bit of patch in here. Doesn't look like the bottom of the hall's real..
0:56
Well, it looks like it's leaking something there. I'm not sure what that is
1:00
I'll have to flip it and take a look. Doesn't look too terrible
1:04
Quite a few hits here. Well, looks like it did get beat up somewhere
1:10
Caught on it or against the dock or something. That's... I got to do some..
1:16
patch in there. Somebody's already tried to patch it there. So we'll have to do some work with that
1:26
I don't really like these railings. Change this console. I mean this isn't too bad but I'd probably I'd rather have this be a bigger deck
1:35
yeah we're gonna do some patching under here I'd rather build something more like
1:43
this to the side seeing stand up stand right up here on the side drop your lights out
1:50
gear to this railing but other than that doesn't look too terrible this is definitely
2:00
to cut the cut the deck out and probably put some stringers in here and just dig out all the foam putting the rub rail on it Not too bad
2:19
Now the story behind the boat is that this thing went through Irma through the hurricane and it just got all beat up
2:25
so then the soft deck kind of constituted the abandonment of the project so that's where we came in
2:35
and now we are going to take this thing over and finish it out the first thing we need to do
2:41
today is we just need to take everything out of here we need to get these speakers out of here see
2:46
if they're viable see if this is any good pull this panel out get that steering out of
2:51
there control cables pull all that stuff out of the rigging tube just get everything
2:55
everything out of this boat so that way we can cut the console out then once we come to the console out we can flip this thing over and fix all the outside hole and then once we get the outside hole fixed then we can flip it back over build our top and we'll go from there
3:13
I mean really this actually isn't that bad up here I kind of I don't know we'll see we'll see what it looks like so let's start taking this thing apart
4:06
The 14 pins that comes from the end
4:38
14 pins? Yeah. Last year, before I bought that mercury. All the wood chips with it
4:47
Shower with me. Oh yeah. She's waterlogged
5:10
She's water stream. Oh yeah, the thing's completely for water. It's right
5:20
You're right now Actually close so foam so water can't penetrate it
5:48
Oh, raised the tranceom. That's what he did. Somebody cut this out
5:56
For a 20-in shaft, or a 15. It has a lower, you know, this has a cut out, but it only goes down about that far
6:04
Yeah, it does get, yeah. Oh, right. All right all right okay so now we got everything out of the boat all the electronics all the wiring all the old buses stuff
6:26
You know, I was first thinking that I wanted to pull this console off and redo it, but, I mean, it's just kind of goofy looking
6:32
I might just cut this piece off here and flatten that out, but I think I'm going to leave this in here because this is actually not too bad
6:39
It's not made out of wood, so I'm more inclined now to leave this in here, leave this deck the way it was
6:46
I wish it was back a little bit more, but I think this will be all right, because once you stand up here
6:53
my main thing is that you can have three people up here. So you have one person driving, one person standing on the side, and you actually, you've got enough space here
7:03
That might be what's going on with here, giving that extra room for the rub rail, because I don't know if that's too rubber
7:09
rails or what exactly is going on there? When I look here it, I mean it looks almost like
7:16
there's two rub rails, but I don't know what this is. It doesn't look like it's another
7:22
rub rail because how shallow it is, but it's like a spacer. Interesting. Nonetheless, that's
7:31
all got to come off, so I'm saying all this down. I don't like how this edge is, but
7:36
I'm not sure what I want to do here just yet we'll see once get the
7:41
rub rail and everything figured out I need to build the brackets for the lights to go down
7:45
I don't think I'm going to flip the boat anymore because I think everything that I need to do
7:49
I'll just pick the boat up sticking on the bunk and do all of this
7:54
on a bunk opposed to flipping it over because if I flip it over
8:00
I'm going to have to figure out something to do with that console so it doesn't get messed up
8:04
but I'm not 100% what I'm going to do there just yet
8:08
because this is almost, this is pretty, it's all pretty easy. So that's where we're at
8:20
Now let's go and start cutting this out
